Our Appliance Repair Services in Boston

Refrigerator repair and freezer repair

Your refrigerator serves as the center of your kitchen and is essential for keeping food fresh and safe. When this unit fails, the clock starts ticking on your groceries. A malfunctioning fridge disrupts meal planning and can lead to significant waste. We understand the urgency required when cooling systems fail. Modern refrigerators are complex machines with intricate control boards, sensors, and dual cooling zones. Our team stays updated on the latest cooling technologies to ensure we can address problems with both standard units and high end integrated models found in many renovated Boston kitchens.

Common problems we fix:

• Refrigerator is not cooling effectively
• Freezer is building up excess frost
• Water is leaking onto the floor
• Unit is making loud or unusual noises
• Ice dispenser is jammed or not working
• Water dispenser is not releasing water
• Fresh food compartment is freezing items
• Door seal is torn or not closing tight
• Digital display shows error codes
• Compressor runs continuously without stopping

How we approach the repair

Our approach begins with a thorough assessment of the sealed system and electrical components. We check the compressor, evaporator coils, and condenser fans to ensure proper airflow and temperature regulation. Safety is paramount when dealing with refrigerants and electrical connections. We use precise tools to detect leaks or sensor failures. In many older Boston homes, limited ventilation around the fridge cabinet can cause overheating. We inspect the installation environment to see if external factors are contributing to the failure. Our goal is to ensure your refrigerator maintains consistent temperatures for years to come.

Washing machine repair

A reliable washing machine is vital for keeping a household running smoothly. When your washer breaks down, laundry piles up fast, forcing you to rely on laundromats or expensive wash and fold services. This is especially inconvenient in the city where transporting laundry can be a hassle. We service top loading and front loading machines across all major configurations. From heavy duty bedding cycles to delicate hand wash settings, we ensure every function operates as intended. We recognize that laundry appliances are often tucked into tight closets or basements in Boston area homes, and we are skilled at working in these confined spaces.

Common problems we fix:

• Washer will not spin or agitate
• Water is not draining from the drum
• Machine stops mid cycle
• Excessive vibration or walking across the floor
• Loud banging noises during spin cycle
• Door or lid will not lock
• Water leaking from the bottom
• Clothes come out soaking wet
• Strange odors coming from the drum
• Control board is unresponsive

How we approach the repair

We start by testing the drive system, drain pumps, and water inlet valves. Diagnostics often involve checking the motor and belt condition or testing the direct drive assembly. For front loaders, we pay close attention to the door boot seal and latch mechanism. Water leaks in multi unit buildings like condos in the South End can cause damage to neighbors below, so we prioritize leak detection and hose integrity. We ensure the machine is level and stable to prevent future mechanical stress. Our technicians focus on practical solutions that extend the life of your laundry equipment.

Dryer repair, gas and electric

A functioning dryer is necessary for completing the laundry cycle efficiently. Hanging clothes to dry is rarely an option in Boston winters or in apartments with limited space. A broken dryer can leave you with damp clothes and a damp home environment. We service both electric and gas dryers. Each type has specific safety considerations that we take very seriously. Whether you have a stacked unit in a closet or a side by side setup in a basement, we have the expertise to troubleshoot heating and tumbling issues. We also understand the importance of proper venting, which is crucial for safety and efficiency in older city architecture.

Common problems we fix:

• Dryer is running but not heating
• Drum is not tumbling
• Dryer makes squeaking or rumbling sounds
• Clothes take multiple cycles to dry
• Unit gets too hot and shuts off
• Timer does not advance
• Burner does not ignite on gas models
• Start button is broken or unresponsive
• Vent warning light is on
• Burning smell coming from the unit

How we approach the repair

Our diagnostic process involves testing heating elements, thermostats, and thermal fuses. For gas units, we inspect the igniter and flame sensor operation. Airflow is the most critical factor for dryer performance. We check internal blowers and seals to ensure lint is not obstructing the system. In many Boston brownstones, long vent runs can create back pressure that strains the dryer. We assess these external conditions to determine if they caused the component failure. We aim to restore safe and efficient drying times so you can return to your routine without worry.

Dishwasher repair

The dishwasher is a time saving appliance that keeps your kitchen sanitary and organized. Hand washing dishes is a chore that few people have time for in a busy schedule. When a dishwasher fails, dirty dishes stack up on the counter, creating clutter and hygiene concerns. We repair built in and portable dishwashers of all styles. Modern dishwashers are quiet and water efficient, but they rely on complex sensors and pumps. We are familiar with the plumbing quirks found in neighborhoods like Charlestown and Beacon Hill, which can sometimes impact dishwasher drainage and water supply performance.

Common problems we fix:

• Dishes are not coming out clean
• Water is pooling at the bottom of the tub
• Wash cycle runs too long
• Unit is not filling with water
• Soap dispenser door does not open
• Buttons on the control panel do not work
• Door latch is broken or loose
• Leaking water onto the kitchen floor
• Noises like grinding or humming
• Glasses come out cloudy or spotted

How we approach the repair

We investigate the circulation pump, drain pump, and spray arms to ensure water is moving with enough force. We also check the inlet valve and float switch to verify water levels. Leak prevention is a major focus during our service. We inspect door gaskets and hose connections thoroughly. Electronics often cause issues in modern units, so we use multimeters to test control boards and wiring harnesses. We check for debris in the filter system which is a common cause of poor cleaning. We ensure your machine cleans and sanitizes dishes effectively before we finish the job.

Oven range and cooktop repair

Cooking at home requires a dependable oven and stove. Whether you are baking, roasting, or boiling, you need precise temperature control. A broken range forces you to order takeout and disrupts family meals. We service gas and electric ranges, wall ovens, and cooktops. We work on slide in models and freestanding units. In Boston, many homes have older gas lines or unique electrical setups that require a knowledgeable touch. We treat gas appliances with extreme caution and follow strict safety protocols. We also handle induction cooktops and dual fuel ranges found in many upgraded kitchens.

Common problems we fix:

• Oven is not reaching the set temperature
• Burners spark but do not light
• Electric element does not heat up
• Oven door is stuck locked
• Temperature is uneven or burns food
• Glass cooktop is cracked or chipped
• Control panel shows error codes
• Interior light does not work
• Self cleaning cycle fails to start
• Gas smell when unit is on

How we approach the repair

For electric ovens, we test the bake and broil elements and the temperature sensor. On gas ranges, we examine the igniters, safety valves, and burner tubes. Calibrating the temperature is often part of the solution. We check door hinges and gaskets to ensure heat stays inside the oven cavity. Electronics repairs often involve control board diagnostics. We are careful to protect your flooring and cabinetry while moving heavy ranges. Our objective is to ensure your cooking appliances operate safely and accurately for all your culinary needs.

Microwave repair

Microwaves are essential for convenience, allowing for quick heating and defrosting. When a microwave stops working, you lose a significant tool for fast meal preparation. We repair built in microwaves, over the range units, and drawer style models. These appliances contain high voltage capacitors and require professional handling to ensure safety. We do not recommend DIY attempts on microwaves due to the electrical risks involved. We are experienced with the installation challenges of over the range units in compact city kitchens where cabinet space is at a premium.

Common problems we fix:

• Microwave runs but does not heat food
• Turntable does not rotate
• Touchpad is unresponsive
• Unit sparks during operation
• Door does not open or close properly
• Exhaust fan does not work
• Display is dim or flickering
• Unit shuts off after a few seconds
• Internal light is burnt out
• Loud buzzing or humming sounds

How we approach the repair

We test the magnetron, diode, and capacitor to identify heating failures. We also inspect door interlock switches which are a frequent cause of operation issues. For units with exhaust fans, we check the blower motor and grease filters. We verify that the unit is venting correctly, which is important for air quality in smaller homes. We handle the heavy lifting required to remove and service installed units. Our technicians ensure the microwave is safe to use and functions correctly before completing the service.

Ice maker repair

A dedicated ice maker or a refrigerator ice system provides convenience for entertaining and daily hydration. When it fails, you are stuck buying bags of ice. We repair standalone ice machines and built in freezer ice makers. Ice production issues often relate to water supply or temperature problems. In older Boston plumbing systems, sediment or low water pressure can sometimes affect ice maker performance. We understand the mechanics of ice molds, ejector arms, and harvest cycles. We aim to get your ice production back to full capacity quickly.

Common problems we fix:

• Ice maker is not producing any ice
• Ice cubes are too small or hollow
• Ice tastes or smells bad
• Water is leaking inside the freezer
• Ice is clumping together in the bin
• Ejector arm is stuck
• Ice maker makes loud clicking noises
• Dispenser chute is clogged with frost
• Unit is overfilling with water
• Production is slower than normal

How we approach the repair

We start by checking the water inlet valve and the water line for blockages or kinks. We inspect the mold thermostat to ensure it signals the harvest cycle at the correct temperature. If the module motor is failed, we replace the necessary components. We also check the level of the machine, as proper leveling is critical for water fill accuracy. We sanitize components where possible to ensure fresh tasting ice. Our focus is on reliable production and preventing water damage from leaks.